光电二极管探头
PD300
PD300是一款通用型光电二极管激光测量传感器，配备旋转座及可拆卸式滤光片，具有10x10mm孔径。未装配滤光片时，其光谱范围为350 - 1100nm，功率测量范围为500pW - 30mW。装配滤光片时，其光谱范围为430nm - 1100nm，功率测量范围为200µW - 300mW。该传感器具有Ophir专有的自动背景减除功能。
-
350 to 1100 nm silicon photodiode sensor
-
500 pW to 300 mW power measurement range
-
Swivel mount for hard to measure places
-
Comes with filter in / filter out options
-
Patented automatic background subtraction
-
Fiber optic adapters available
PD300R
PD300R是一款通用型圆筒形几何形状光电二极管激光测量传感器，具有10mm孔径和可拆卸式滤光片。未装配滤光片时，其光谱范围为350 - 1100nm，功率测量范围为500pW - 30mW。装配滤光片时，其光谱范围为430nm - 1100nm，功率测量范围为200µW - 300mW。
-
350-1100 nm silicon photodiode sensor with Ø10 mm aperture
-
500 pW to 300 mW power measurement range
-
Includes removable filter
-
Fiber optic adapters available
PD300-UV-193
PD300-UV-193是一款宽光谱范围光电二极管激光测量传感器。具有10x10mm孔径，配备旋转座及可拆卸式滤光片。未装配滤光片时，其光谱范围为200 - 1100nm，功率测量范围为20pW - 3mW。装配滤光片时，其光谱范围为220nm - 1100nm，功率测量范围为2µW - 300mW。在193nm波长处存在一个附加的校准点，精度为±6%。
-
200-1100 nm uv-silicon photodiode sensor with 193 nm calibration point
-
20 pW to 300 mW power measurement range
-
Swivel mount for hard to measure places
-
Includes removable filter
-
Fiber optic adapters available
热释电探头
PE9-ES-C
PE9-ES-C是一款针对超低能量的热释电能量计，具有8mm孔径。其能量测量范围为<0.05uJ - 200uJ。可在高至25kHz的重复频率下工作，光谱覆盖范围为0.15 - 12µm。
-
High rep rate metallic absorber with a 0.15-12 µm spectral range
-
0.1 to 200 μJ pulse energy measurement range
-
20 μs maximum pulse width
-
Repetition rates up to 25,000 Hz
PE25-C
PE25-C是一款通用型热释电能量计，具有24mm孔径。其能量测量范围为8µJ - 10J。可在高至10kHz的重复频率下工作，光谱覆盖范围为0.15 - 3µm。
-
High rep rate metallic absorber with a 150-3000 nm spectral range
-
8 μJ to 10 J pulse energy measurement range
-
5 ms maximum pulse width
-
Repetition rates up to 10,000 Hz
PE50BF-C
PE50BF-C是一款高损伤阈值热释电能量计，具有46mm孔径。其能量测量范围为120µJ - 10J。可在高至250Hz的重复频率下工作，光谱覆盖范围为0.15 - 3µm及10.6µm。
-
High damage threshold BF absorber with 150-3000 nm & 10.6 µm range
-
120 μJ to 10 J pulse energy measurement range
-
20 ms maximum pulse width
-
Repetition rates up to 250 Hz
热电堆探头
2A-BB-9
2A-BB-9是一款高灵敏度激光功率/能量传感器，噪音和漂移极低。具有9.5mm孔径。功率测量范围为20µW - 2W，能量测量范围为10µJ - 2J。其光谱平坦，光谱覆盖范围为0.19 - 20µm。
-
High sensitivity broadband 0.19 to 20 µm absorber
-
20 µW to 2 W power measurement range
-
20 µJ to 2 J energy measurement range
-
Very low noise and drift
-
Fiber optic adapters available
L30A-EX-10MM
L30A-EX-10MM是一款很薄的热电堆探头，厚度10mm，孔径26mm。独立安装时，测量范围从80mW到8W，加热沉时可测量到30W。亦可测量 20mJ 至 30J的单脉冲能量值。其损伤阈值为0.5J/cm²，光谱范围涵盖0.15-0.7μm以及10.6μm。
-
EX type 150 to 700 nm and 10.6 µm absorber
-
80 mW to 8 W average power measurement
-
20 mJ to 30 J pulse energy measurement
-
30 W power measurement when heat sinked
L1500W-LP2-50
L1500W-LP2-50是一款用于高功率密度和长脉冲激光的水冷热电堆功率/能量激光测量探头。其孔径为50mm，可连续测量15W至1500W的功率，以及间歇测量500mJ-200J的功率。其高损伤阈值LP2涂层可覆盖0.35至2.2μm的光谱范围。
-
Long pulse 350-2200 nm absorber
-
Water-cooled for 15 to 1500 W average power measurement
-
500 mJ to 200 J energy measurement
